Q-See Presidio Series User Manual

8
5B. Connect the other end of the cable to an open port
on your router (not included). You will hear a click
when the cable is properly connected.
Step 5: Connect to the Router
5A. Plug the included Network (Ethernet) cable into the
Network (LAN) port on the back of the NVR.
Step 6: Powering Up the NVR & Cameras
6A. Plug the NVR power supply cable into the power
port on the back of the NVR. Your power port and
power cable may look different than pictured here.
6B. Plug the NVR power supply cable or power adapter
into a surge protector (not included).

Q-See Presidio Series Specifications

General

Brand	Q-See
Model	Presidio Series
Category	Security System
Language	English