Need help?Do you have a question about the QAcoustics 3030i Series and is the answer not in the manual?
General safety guidelines and warnings for operating loudspeakers.
Key instructions to read and follow before using the loudspeakers.
Instructions on how to safely unpack the speakers and check for damage.
Guidelines and precautions for installing the loudspeakers.
Warnings regarding exposure to rain, moisture, dripping, or splashing.
Information on when and how to get the apparatus serviced.
Explanation of symbols, including the hazard warning symbol.
Information on using foam bungs for rear-ported speakers to manage bass.
Instructions for attaching the rear stabiliser to the 3050i model.
Guidance on positioning the 3010i, 3020i, and 3030i models.
Specific positioning advice for the 3050i floorstanding loudspeakers.
Placement considerations for the subwoofer to optimize bass response.
Positioning recommendations for the 3090Ci centre channel speaker.
Placement advice for surround speakers in a multi-channel setup.
Details on the standard two-terminal crossovers used on the speakers.
Advice on choosing and preparing loudspeaker cables for optimal performance.
Step-by-step guide on how to connect speaker cables to the terminals.
Standard wiring diagram and instructions for stereo connections.
Proper methods for cleaning the speaker cabinets without causing damage.
Recommendations for cleaning the speaker grilles.
Important advice on avoiding touching the speaker drive units.
Details and dimensions for the single wall bracket.
Information on speaker stands for 3010i/3020i and 3030i models.
Details for the subwoofer wall bracket for the 3060S model.
Detailed specifications for the 3010i and 3020i passive loudspeakers.
Technical specifications for the 3060S active subwoofer.
Technical specifications for the 3030i passive loudspeaker.
Technical specifications for the 3050i floorstanding loudspeaker.
Technical specifications for the 3090Ci centre channel loudspeaker.
General| Frequency Response | 46Hz - 30kHz |
|---|---|
| Nominal Impedance | 6 Ohms |
| Sensitivity | 88dB |
| Recommended Amplifier Power | 25 - 75W |
| Crossover Frequency | 2.4kHz |
| Effective Volume | 12.5L |
| Finish | Graphite Grey, English Walnut, Carbon Black, Arctic White |
| Type | Bookshelf |
| Weight | 6.4kg |
| Drive Unit | 22mm (0.9 in) tweeter |
| Dimensions | 200mm x 325mm x 329mm |
To Next Page
