Need help?Do you have a question about the QAcoustics Concept 300 and is the answer not in the manual?
Adheres to safety guidelines, volume control, and hearing protection during operation.
Instructions for unpacking, handling, and inspecting loudspeakers for damage.
Covers secure mounting, moisture precautions, and when to seek qualified servicing.
Explanation of hazard warning symbols and waste electrical equipment symbol.
Lists all items included in the Concept 300 package, such as the speaker, manual, and accessories.
A welcome message and explanation of the Concept 300's design philosophy for balance and accuracy.
Guidance on using the Concept 300 Floor Stand and understanding the suspension system.
Advice on optimal placement for stereo imaging and sound stage width.
Explains how to use foam bungs to manage bass reinforcement with rear-ported speakers.
Description of the four terminals and pre-fitted links for bi-wiring or single-wiring.
Instructions for connecting loudspeakers to amplifier using standard single-wire configuration.
Steps for bi-wiring loudspeakers, involving removing links and using separate cables.
Explains how to use the jumper to adjust the high frequency response for room acoustics.
Guidance on the initial use period required for suspension materials to reach optimal performance.
Instructions for cleaning cabinets, drive units, and grilles without causing damage.
Advice on placement to avoid heat, sunlight, and protecting drive units from damage.
Details the 4-year warranty, repair procedures, and rights, with an option for extension.
Contact details for service inquiries and company address.
Details frequency response, impedance, sensitivity, power handling, and crossover frequency.
Provides dimensions for drivers and overall cabinet, including weight.
General| Enclosure type | Bass reflex |
|---|---|
| Nominal Impedance | 6 Ω |
| Crossover Frequency | 2.5kHz |
| Bass Unit | 165mm (6.5 inch) |
| Treble Unit | 25mm (1 inch) soft dome |
| Frequency Response | 30kHz |
| Sensitivity | 87dB |
| Recommended Amplifier Power | 25 - 100 Watts |
| Type | 2-way bookshelf speaker |
To Next Page
