Need help?Do you have a question about the QAcoustics 3010i and is the answer not in the manual?
Follow instructions, switch off mains, use low volume, avoid full volume.
Lift by cabinets, do not drag, retain packaging, check for damage.
Placement, heat sources, moisture, climate, and use of accessories.
Refer servicing to qualified personnel; understand product symbols.
Details the Q Acoustics 3000i series models and their features.
Lists items included in the carton for different speaker models.
Lifting, moving, and initial positioning advice for speakers.
Instructions on using foam bungs for rear-ported speakers to adjust bass.
Guide to attaching the rear stabiliser and spikes for the 3050i model.
Recommendations for positioning 3010i, 3020i, and 3050i models for optimal sound.
Advice on positioning the subwoofer for best bass response and stereo image.
Specific placement advice for the 3090Ci centre channel speaker.
Recommendations for positioning surround speakers in a 5.1 system.
Details on terminals and how to prepare loudspeaker cables.
Step-by-step guide for connecting speaker terminals and standard stereo wiring.
Instructions for cleaning speaker cabinets using appropriate materials.
Advice on cleaning grilles and avoiding contact with drive units.
Details warranty period, coverage, and how to register for extensions.
Information and dimensions for wall brackets and speaker stands.
Details of the wall bracket designed for the 3060S subwoofer.
Technical details for 3010i, 3020i passive speakers and 3060S subwoofer.
Technical details for 3050i floorstander and 3090Ci centre channel speakers.
General| Enclosure Type | Bass Reflex |
|---|---|
| Configuration | 2-Way |
| Frequency Response | 65 Hz - 30 kHz |
| Sensitivity | 86 dB |
| Recommended Power | 25 - 75 W |
| Weight | 4.1 kg |
| Type | Bookshelf |
| Treble Unit | 22 mm |
| Nominal Impedance | 6 Ohm |
| Minimum Impedance | 4 Ohm |
| Finish | Graphite Grey, Carbon Black |
| Bass Unit | 100 mm (4 in) |
To Next Page
