Qass Optimizer4D - Uninterrupted power supply (UPS); Vcc Power port allocation; Measuring chain

Optimizer4D Technical Specifications
8 / 27
Measuring chain
The measuring chain of Optimizer4D
consists of a sensor (shown left in the
image), a connector from sensor to
pre-amplifier, the pre-amplifier itself and
a pre-amplifier-cable (green) from pre-
amplifier to Optimizer4D.
Vcc Power port allocation
Uninterrupted power supply (UPS)
Integrated uninterrupted power supply,
UPS: This component consists of several
supercapacitors (Super Caps). In case of a
blackout, the UPS enables the measuring
device to shutdown properly. This will
prevent loss of data to a major extent.
Just the measuring data of the work piece
which was processed in the moment of
the blackout will be lost.
Vcc Power port allocation
Pos. Function
1 GND
2 12/24 V Input
3 Potential equalization
1 2 3