To Next PageTo Next PageWhat does SENSOR SYNC mean on my QCA Spas Hot Tub?
The SENSOR SYNC message on your QCA Spas Hot Tub indicates that the sensors are out of balance. If the problem persists, contact your dealer or service organization.
Why does my QCA Spas QCA Paradise display --F° or --C°?
The display of --F° or --C° on your QCA Spas Hot Tub indicates that the temperature will be displayed after the pump has been running for 2 minutes.
Why does my QCA Spas Hot Tub display ----?
The display of ---- on your QCA Spas Hot Tub indicates that in Economy or Sleep mode, the pump may be off for hours outside a filter cycle. If you wish to see the current spa temperature, either switch to Standard mode or turn Jets1 on for at least two minutes.
What does CLEAN FILTER mean on my QCA Spas Hot Tub?
The CLEAN FILTER message on your QCA Spas Hot Tub means that you should remove, clean, and reinstall the filter per the manufacturer’s instructions.
What does TEST GFCI mean on my QCA Spas QCA Paradise Hot Tub?
The TEST GFCI message on your QCA Spas Hot Tub means that you should test and reset the GFCI per the manufacturer’s instructions.
Covers grounding, GFCI, shock risks, and appliance proximity.
Advises on water temperature, pregnancy, alcohol, drugs, and medical conditions.
General electrical specifications and installation guidelines for spa power.
Explains the meaning of various icons displayed on the spa control panel.
Lists and explains error messages displayed on the control panel.
Comprehensive guide to maintaining spa water chemistry, including daily/weekly checks.
General