QED AP4+ - AP4+ Bottom Inlet Short

Specifications - Bottom Inlet, Short
27
AP4 B
+
Max. Flow
O.D.
Length
13 gpm (49 lpm)
)mm 19( ni 6.3
39.3 in. (100 cm)
Advantages
1. The original automatic air-
powered well pump, proven
worldwide over 23 years
2. The highest ow rates and
deepest pumping capabilities in
the industry
3. Patented, proven design for
superior reliability and
durability, even in severe
applications
4. Handles solids, solvents,
hydrocarbons corrosive
conditions, viscous uids and
high temperatures beyond the
limits of electric pumps
5. Five-year warranty
Description
The AP4+ Bottom Inlet Short AutoPump provides maximum
capabilities and ow in a bottom inlet pump for 4” (100 mm)
diameter and larger wells with shorter water columns and/or
the need to pump down to lower water levels, compared to
full-length pumps. It is oered in optional versions to handle
even the most severe remediation and landll pumping
applications, and delivers ow rates up to 13 gpm (49 lpm)*.
The AP4+ Short Bottom Inlet AutoPump is complemented by
the most comprehensive selection of accessories to provide
a complete system to meet site specic requirements. Call
QED for prompt, no-obligation assistance on your pumping
project needs.
The AutoPump Heritage
The AP4+ Bottom Inlet Short AutoPump is part of the
famous AutoPump family of original automatic air-powered
pumps, developed in the mid 1980s specically to handle
unique pumping needs at remediation and landll sites.
Over the years they’ve proven their durability at thousands
of sites worldwide. AutoPumps are designed to handle
dicult pum
ping challenges that other pumps can’t, such
as hydrocarbons, solvents, suspended solids, corrosives,
temperature extremes, viscous uids and frequent start/
stop cycles. Beyond just the pump, AutoPump systems
oer the most complete range of tubing, hose, connectors,
wellhead caps and accessories to help your installation go
smoothly. This superior pumping heritage, application
experience and support back up every AutoPump you put
to work on your project.
4PA
+
pmuPotuA