Qilive Q.5870 User Manual

8
EN
5. OPERATION
5.1. BEFORE PLUGGING THE VACUUM CLEANER
5.1.1. SELECTING A CLEANING TOOL
Choose a cleaning tool for your cleaning task.
■ Floor brush: To clean carpets or hard oors.
■ Round brush: To clean hard furniture surfaces, corners of ceilings or blinds.
■ Crevice nozzle: To clean skirting boards, corners and tight areas.
■ Upholstery tool: To clean sofas, cushions, chairs.
5.1.2. ATTACHING / REMOVING A CLEANING TOOL
2
A
B
Attaching a cleaning tool
■ The cleaning tools (16, 18, 19 and 20) can be attached
to the end of the telescopic tube (14) (Fig. 2A, 3A), or
the handle of the suction hose (13) (Fig. 2B).
■ Simply align the cleaning tool of your choice with the
connecting part and push rmly until it locks into place.
Removing a cleaning tool
■ To remove a cleaning tool (16, 18, 19 and 20), hold the
neck of the tool and pull it out.
5.1.3. USING THE TELESCOPIC TUBE
3
A
B
Attaching the telescopic tube
Connect the telescopic tube to clean oors or for extra reach:
■ Insert the handle of the suction hose (13) into the upper
end of the telescopic tube (14) and push the handle
rmly until it locks into place (Fig. 2A).
■ Insert the lower end of the telescopic tube (14) into the
cleaning tool (16, 18, 19 or 20) and push the tube rmly
until it locks into place (Fig. 3A).
Accessories holder
■ The accessories holder (21) can be clipped onto the
telescopic tube (14) to keep cleaning tools handy during
cleaning (Fig. 3B).

Qilive Q.5870 Specifications

General

Brand	Qilive
Model	Q.5870
Category	Vacuum Cleaner
Language	English