What does C1 mean on Qlima D 825 PA Smart Dehumidifier?
The error code C1 on your Qlima dehumidifier indicates an open cut or short cut of the NTC thermistor. Contact the dealer or an authorized technician for assistance.
Why Qlima D 825 PA Smart does not dehumidify?
Your Qlima dehumidifier might not be dehumidifying because the water container is full and needs emptying. Alternatively, the container may not be correctly placed; ensure it's properly positioned. A clogged air filter can also prevent dehumidification, so try cleaning it. Finally, the dehumidifier may have reached its pre-set humidity level, in which case it's normal for it to stop dehumidifying.
What to do if Qlima Dehumidifier shows maintenance message after 360 hours?
If your Qlima Dehumidifier displays a maintenance message after 360 hours, it's recommended to clean the pre-filter. Once cleaned, press the “SPEED” button to clear the message.
What to do if Qlima Dehumidifier shows maintenance message after 2160 hours?
When the Qlima Dehumidifier shows a maintenance message after 2160 hours, clean the HEPA filter or replace it if necessary. After cleaning or replacing, press the “SPEED” button to clear the message.
What to do if Qlima D 825 PA Smart works, but reduces the relative humidity insufficiently?
If your Qlima dehumidifier is running but not reducing humidity effectively, it might be due to the room being too large or having too many humidity sources; consider using a dehumidifier with a greater capacity. Also, excessive ventilation can hinder its performance, so reduce ventilation by closing windows and doors.
What does C8 mean on Qlima D 825 PA Smart Dehumidifier?
The error code C8 on your Qlima dehumidifier indicates refrigerant leakage. Refer to the safety sentences and instructions for guidance.
Review safety manual and ensure proper placement for optimal dehumidifier performance and user safety.
Details ON/OFF button, SPEED settings, and OPERATION modes (ECO, Purify, Dehumidify).
Explains HUMIDITY range setting, TIMER function, and SWING mode activation.
Explains MODE button for various settings (Manual, Dry, Night, AUTO) and Wi-Fi matching process.
Information on water full indicator, auto defrost, compressor protection, and inner dry function alerts.
Describes how the appliance memorizes settings and automatically restarts after power failure.
Explains red, yellow, and blue lights indicating ambient humidity levels (≥80%, 56-78%, ≤54%).
Describes 'HI'/'LO' display for humidity and how to enable silent mode by muting beeper.
Step-by-step guide for manually removing and emptying the water tank for safe disposal.
Instructions for connecting a hose to the drainage hole for continuous water removal.
Details on using the pump drain with a plastic tube, ensuring proper connection, and safety precautions.
Guide to enabling Bluetooth/Wi-Fi, downloading the 'Smart life' app, and initiating Wi-Fi matching.
Technical specifications for wireless connectivity, including working frequency, power, standard, and antenna type.
Instructions for cleaning the appliance exterior with dry or damp cloths, and periodic dust checks.
Guidance on cleaning filters weekly and per season to prevent airflow blockage and ensure performance.
Details of the two-year warranty, coverage, exclusions, and claim procedures based on purchase receipt.
Solutions for unit not working, poor dehumidification, and factors affecting performance like room size or ventilation.
Lists error codes (C1, C2, C8) with their conditions and recommended solutions, often involving dealer contact.
Explanation of P1 (automatic defrost) and P2 (pump working abnormally) notification messages on the display.
Explanation of P3 (maintenance reminder) and P4 (long-term operation) notifications, including reset actions.
General| Water tank capacity | 5 liters |
|---|---|
| Operating temperature range | 5-35°C |
| Weight | 15 kg |
| Refrigerant | R290 |
| Smart control | Yes |
| Dehumidification capacity | 25 liters/day |
| Type | Compressor |
To Next Page
