Qlima D 825 PA Smart

4
35
P1
This notication message indicates that the dehumidier has entered the automatic
defrost function. Then let the appliance defrost until the message disappears.
P2 This notication will apear when the PUMP is working abnormal
P3
This notication appears when the dehumidier has been working for 360 hours,
causing the maintenance message to appear on the screen. It is recommended to clean
the pre-lter. After it has been cleaned, the “SPEED” button can be pressed and the
message will disappear. This message will appear on the display after every 360 hours of
operation.
P4
This notication will appear on the display when the device has worked for 2160
hours. It is recommended to clean the HEPA lter or replace it if necessary. After it has
been cleaned or replaced, press the “SPEED” button which will clear the message. This
notication will continue to repeat after every 2160 hours that the device has been
working.