4
32
When the drain hose is eventually removed, prepare for water leaking out of the hose or the
drain nozzle.
PUMP DRAIN
Remove the drain stop e and use a plastic drainage tube
that has to be inserted in the drainage hole r. Then
switch on the pump function (1). Make sure the drain
tube is properly connected to the water outlet t to avoid
water leakage and possible damage to your oor.
Caution: When there is notube, always plug the drain stop into the
water outlet e, water will ow into the water tank. This can avoid
leakage problems after use / accidental activation of the pump drain
function.
WIRELESS OPERATION (ONLY AVAILABLE ON SMART MODELS)
BASIC RF FEATURES
Parameter Description
Working frequency 2.400 to 2.4835 GHz
Conducted power 13 dBm to 23 dBm
Wireless standard IEEE 802.11b/g/n (channels 1 to 14)
Data transmission rate 11b: 1, 2, 5.5, 11 (Mbps)
11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbps)
11n: HT20 MC S 0 to 7
Antenna type PCB antenna with a peak gain of 2.54 dBi
1. Enable bluetooth and WiFi on your phone or tablet. Use your phone to scan the
QR code below or search “Smart life” in Google play or App store to download
and install the app.
2. Open the app and sign in.
3. Press the ‘MODE’ button for 3 seconds to activate the Wi-Fi matching process.
4. Follow the instructions in the app.
NOTE:
• The unit supports 2.4 GHz Wi-Fi networks only. Check your network frequency, contact
your Internet provider or refer to your wireless router manual.
• If the unit is having trouble connecting to the Wi-Fi network, it may be too far from the
router.
• The Wi-Fi connection may be interrupted because of the home network and/or
surrounding wireless environment.
• The Wi-Fi connection may not work depending on the Internet provider.
To Next Page
Loading...
Need help?
General
