Qlima MS-AC 5001 - Operation of Control Panel; Power and Mode Control; Temperature and Fan Speed Adjustment

C OPERATION OF CONTROL PANEL
1. Power
Press this key to turn the device on and off.
When the air conditioner is switched on, the temperature is set to 22ºC by
default. The temperature sensor measures the ambient temperature and if
exceeds 22ºC, the outdoor unit starts to work to bring the temperature down.
If the ambient temperature already below 22ºC, then the outdoor unit does not
start.
2. Mode
Press this key to select cooling, fan, dehumidification modes;
In standby/turned on mode, by pressing this key for 3 seconds to set timing on/
off.
3. Temperature / time adjustment
In cooling mode, press the key to increase or decrease the temperature, the set-
ting temperature adjustable from 16~30ºC;
In timer mode, press the key to adjust time to turn on/turn off the machine.
Press Up/Down key at the same time to transfer between ºC and ºF.
4. Fan speed
Press the key to choose low/high fan speed.
5. Sleep mode
Press the key to enter or quit sleep mode. After 20 seconds, all lights and the
digital display turn off and the air conditioner goes to sleep. The indoor unit fan
continues to run at low fan speed.
6. Display window
Check temperature and time from this window.
7. Swing
Press fan speed and sleep mode key at the same time to turn on/off swing func-
tion.
4
57
man_MS-AC 5001 ('22) V4.indd 57man_MS-AC 5001 ('22) V4.indd 57 19-05-2022 11:1219-05-2022 11:12