Drain
cover
Drain
cover
Drain
pipe
1. Remove the unit from the window.
2. Remove the rubber seal from the indoor unit and outdoor unit, drain the
condensate water.
3. Keep running in fan mode to make the internal dry.
4. Turn off the conditioner and pull down the plug.
5. Wash the filter then install.
6. Remove all the brackets on the air conditioner, install the brackets of the
indoor unit on the outdoor unit, assemble as shown in the figure below, and
then store the unit against the wall.
7. Store the air conditioner in a cool and dry place.
8. We recommend that you put the air conditioner back in its packaging when
you store it. This prevents dirt and dust from collecting on the air conditio-
ner.
4
59
man_MS-AC 5001 ('22) V4.indd 59man_MS-AC 5001 ('22) V4.indd 59 19-05-2022 11:1219-05-2022 11:12
To Next Page
Loading...
Need help?
General
