1. READ THE DIRECTIONS FOR USE FIRST.
2. IN CASE OF ANY DOUBT, CONTACT YOUR DEALER.
Diagrams for illustrative purposes only
4
63
TOOLS
REQUIRED
Spirit level
Drill
Tape measure
180 mm Core drill
8 mm masondry drill
Sharp knife
20 mm masondry
drill
Pencil
WHAT'S
INCLUDED
Air conditoner
Wall template
Plastic ducting sheet
(X2)
7 Wall plugs
(8×40mm)
Vent cover (x2)
(chain, indoor ring
and outdoor cover)
Remote control
7 Screws (5×60mm)
Wall bracket
Fixed plate
2 topping screws
(4x10mm)
BEFORE STARTING INSTALLATION, PLEASE ENSURE YOU HAVE ALL SUITABLE EQUIPMENT AVAILABLE AND
UNDERSTAND THE STEPS INVOLVED IN INSTALLATION. IF IN ANY DOUBT, PROFESSIONAL ADVICE SHOULD
BE SOUGHT.
THE INSTALLER MUST ENSURE THAT THE PLANNED POSITION OF THE AIR CONDITIONER IS SUITABLE, AND
THAT THERE ARE NO CABLES AND PIPES INSIDE THE WALL, AND NO OTHER OBSTRUCTIONS FOXED ON THE
WALL, WHICH WOULD PRESENT A DANGER AND/OR PREVENT COMPLETION OF INSTALLATION.
man_WDC124 SCAN ('22) V2.indd 63man_WDC124 SCAN ('22) V2.indd 63 31-03-2022 11:0831-03-2022 11:08
To Next Page
Loading...
Need help?
General
