CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the wifi light
flashing once per second. If not follow the instructions for changing the wifi connection
mode. Also ensure your phone is connected to the wifi network. (We advise turning mobile
data off during setup)
1. Open app and press “+” to
add device, or use the
add device button
2. Select the type of device as
“Large Home Appliance”
4. Enter your wifi password and
press confirm.
4. Change to the AP mode in
the top right of the screen.
5. Ensure the wifi light on the
air conditioner is slowly
flashing (once per three
seconds), then click NEXT
button to enter the next
setting.
6. Go to network settings in
your phone and connect
to the“SmartLife xxx”
connection. There is no
password to enter. Then
return back to the app to
complete setup.
Once the connection process has completed, go back to the network settings on your phone to
ensure your phone has reconnected to your wifi router.
4
83
man_WDC124 SCAN ('22) V2.indd 83man_WDC124 SCAN ('22) V2.indd 83 31-03-2022 11:0831-03-2022 11:08
To Next Page
Loading...
Need help?
General
