CONNECTING USING QUICK CONNECTION
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light
flashing twice per second. If not follow the instructions for changing the connection mode.
Also ensure your phone is connected to the wifi network. (We advise turning mobile data
off during setup)
1. Open app and press “+” to
add device, or use the
add device button
2. Select the type of device as
“Large Home Appliance”
4. Enter your wifi password and
press confirm.
3. Ensure the wifi light on the
airconditioner is flashing
twice per second, then press
on the orange button at
the bottom of the screen to
confirm.
5. Click NEXT button to scan
and connect a new device.
Waiting for this process to
complete.
6. Please retry if this fails.
please review the trouble-
shooting section for further
help if still unsuccessful
4
82
man_WDC124 SCAN ('22) V2.indd 82man_WDC124 SCAN ('22) V2.indd 82 31-03-2022 11:0831-03-2022 11:08
To Next Page
Loading...
Need help?
General
