AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by
the Time, indoor temperature, humidity of the room, weather conditions, and a range of
other influences.
1. Press on the Smart Scene tab
at the bottom of the Home
screen
2. Press on the Plus in the
topright corner to add a
smartscene.
3. Press on the Launch Tap-to-
Run to create a new Scene.
4. Setup is very similar to the
scene setup on the previous
page, and includes an extra
section for specifying a trig-
ger for the scene to start.
Press the arrow next to
“Name” to input the name
for your Scene
Show on Home Page: Leave
this on if you require the
scene to be displayed as a
button on the Home Screen
Press the Blue Plus to add
the action required. Then
select the air conditioner
from the list of devices.
5. Choose the function, set the
value for the function, and
then press the arrow button
in the top left corner, to re-
turn to the previous screen.
6. Choose the function, and
then press the arrow button
in the top left corner, to re-
turn to the previous screen.
4
87
man_WDC124 SCAN ('22) V2.indd 87man_WDC124 SCAN ('22) V2.indd 87 31-03-2022 11:0831-03-2022 11:08
To Next Page
Loading...
Need help?
General
