4 – Managing Switches
Using the Switch Data Window
4-4 59264-01 A
S
Fan 1 Status Fan 1 status
Fan 2 Status Fan 2 status
Power Supply 1 Status Power supply 1 status
Power Supply 2 Status Power supply 2 status
Temperature Failure Port
Shutdown
Non-configurable (always enabled for this switch). All
ports are downed when the switch temperature exceeds
the Failure Temperature.
Warning Temperature Non-configurable temperature threshold (65° Celsius)
above which a warning condition alarm is generated.
Failure Temperature Non-configurable temperature threshold (70° Celsius)
above which a failure condition alarm is generated.
POST Status Status from the most recent Power On Self Test
POST Fault Code Fault code from the most recent Power On Self Test
Test Status The current diagnostic test status of switch.
Test Fault Code The code value for the last recorded diagnostic test sta-
tus recorded on the switch.
Network Group
IPv4 Enabled Internet Protocol version 4 Enabled status
IPv4 Address Mask that determines the IP address subnet
IPv4 Subnet Mask Mask that determines the IP address subnet
IPv6 Gateway Gateway address
IPv6 Enabled Internet Protocol version 6 Enabled status
IPv6 Address Mask that determines the IP address subnet
IPv6 Gateway Gateway address
CPU0 MAC Address NA-does not apply to this switch
CPU1 MAC Address NA-does not apply to this switch
SNMP Enabled SNMP enabled or disabled
SNMP v3 Security Enabled SNMP v3 Security enabled or disabled
Broadcast Support Broadcast support status. Broadcast support is enabled
(default) or disabled.
Table 4-1. Switch Data Window Entries (Continued)
Entry Description
To Next Page
Loading...
Need help?
General
