QNAP GM-1002 User Manual

Operation User Action Result
Power on NAS Press the power button The node powers on.
Tip
• QNAP recommends
powering on the
device from the rear
panel.
• System startup takes
10 to 15 minutes,
depending on the
number of installed
drives and connected
devices. Check the
rear panel LEDs to
determine the startup
status. For details,
see Rear Panel
LEDs.
Power on OLED display Press the OLED button. The OLED display powers on.
Power off OLED display Press the OLED button. The OLED display powers off.
Front Panel LEDs
The front panel LEDs indicate system status and related information when the NAS is powered on. The
following LED information applies only when the drive is correctly installed and when the NAS is connected
to the network.
For details on the location of the LEDs, see Front Panel.
GM-1000 User Guide
Product Overview 9

QNAP GM-1002 Specifications

General

Brand	QNAP
Model	GM-1002
Category	Storage
Language	English