EasyManua.ls Logo

QNAP TS-264-8G User Manual

QNAP TS-264-8G
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NAS
Quick Installation Guide
Question and Answer IconNeed help?

Do you have a question about the QNAP TS-264-8G and is the answer not in the manual?

QNAP TS-264-8G Specifications

General IconGeneral
ModelTS-264-8G
CategoryNAS
GPUIntel UHD Graphics
M.2 Slots2 x M.2 2280 PCIe Gen3 x1
SSD Cache Acceleration SupportYes
Network Ports2 x 2.5GbE RJ45
PCIe Slot1 x PCIe Gen3 x2
Form FactorTower
Fan1 x 70mm
Kensington Security SlotYes
CPUIntel Celeron N5095/N5105
CPU Architecturex86 64-bit
Memory8 GB DDR4
Memory Slots2 x SO-DIMM DDR4
Drive Bays2 x 3.5-inch SATA 6Gb/s
Drive Compatibility3.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
RAID SupportJBOD, RAID 0, 1
USB Ports2 x USB 3.2 Gen 2
Operating SystemQTS
Power Supply65W adapter, 100-240V
Dimensions168 x 226 mm
LED IndicatorsStatus, LAN, USB, HDD1-2
ButtonsPower, Reset, USB One-Touch-Copy
Operating Temperature0°C to 40°C (32°F to 104°F)
Relative Humidity5 - 95% RH non-condensing
HDMI Output1 x HDMI 2.0 (up to 4K @60Hz)

Summary

NAS Drive Bay Access

Opening the NAS Front Cover

Instructions for removing the front cover to access the drive bays.

Removing a Drive Tray

Procedure for detaching and removing a drive tray from the NAS chassis.

3.5-inch HDD Installation

Preparing 3.5-inch HDD Tray

Attaching a 3.5-inch HDD to the drive tray using screws for installation.

Inserting 3.5-inch Drive Tray

Placing the prepared 3.5-inch drive tray into the NAS drive bay.

2.5-inch HDD/SSD Installation

Preparing 2.5-inch Drive Tray

Securing a 2.5-inch HDD or SSD to the drive tray with screws.

Inserting 2.5-inch Drive Tray

Sliding the prepared 2.5-inch drive tray into the NAS.

Closing the NAS Unit

Re-attaching Front Cover

Sliding the front cover back onto the NAS unit after drive installation.

Securing Installed Drive

Pushing the drive tray lock to secure the installed drive in place.

M.2 PCIe Drive Installation

Preparing M.2 PCIe Drive

Overview of M.2 PCIe drive and preparation, including thermal pad.

Installing M.2 PCIe Drive

Inserting the M.2 PCIe drive into its slot and securing it properly.

Connecting and Powering On

Connecting Network and Power

Connecting the Ethernet cable and power adapter to the NAS.

Powering On the NAS

Pressing the power button to start the NAS device.

Initial Software Setup

Using Qfinder Pro Utility

Guide to using Qfinder Pro for NAS management and initial configuration.

Cloud Installation Process

Initiating device setup via cloud installation using a QR code.

Compliance and Safety Information

Regulatory Compliance Details

Information on FCC, CE, WEEE, and RoHS compliance for the device.

Office Locations

Contact addresses for QNAP offices in the EU and UK.

Related product manuals