QNAP TS-131K User Manual

Note
You must return to this page to complete the installation after creating an account.
6. Specify the myQNAPcloud device name for the NAS.
Note
• The myQNAPcloud device name is used when remotely accessing the NAS.
• For security purposes, the myQNAPcloud Link remote connection service will be disabled
on your NAS after initialization. You can enable it by connecting to QTS through LAN and
then installing myQNAPcloud Link.
7. Click Next.
8. Perform any of the following actions.
• To check for the latest available version, click Start.
The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the Smart
Installation Guide.
• To install the out-of-the-box version, click Skip.
9. Click Start Smart Installation Guide.
10. Specify the following information.
• NAS name: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
• Password: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
11. Click Next.
12. Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
13. Click Next.
14. Select Obtain an IP address automatically (DHCP).
15. Click Next.
16. Select the types of devices that you will use to access shared folders on the NAS.
17. Click Next.
18. Review the settings.
19. Click Apply.
A confirmation message appears.
Warning
Clicking Confirm deletes all data on the drive before installing QTS.
TS-x31K User Guide
Installation and Configuration 25

QNAP TS-131K Specifications

General

RAID support	No
Storage drive size	- \
Hot-swap drive bays	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, NTFS, exFAT, ext3, ext4
Storage drive interface	-
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	1
Supported storage drive interfaces	Serial ATA II, Serial ATA III
Flash memory	512 MB
Internal memory	1 GB
Internal memory type	DDR4
Fan voltage	12 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply location	External
Power consumption (sleep)	7.29 W
Power consumption (typical)	11.62 W
Power supply unit (PSU) capacity	36 W
Chassis type	Tower
Cooling type	Active
Fan diameter	50 mm
Product color	Turquoise, White
LED indicators	HDD, LAN, Status, System
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Type	NAS
Noise level	15.8 dB
Device class	Home & Home Office
Share folder	CIFS/SMB
Backup features	Cloud, USB drive, iSCSI LUN
Browser supported	Mozilla Firefox, Microsoft Edge, Google Chrome, Apple Safari
Security algorithms	256-bit AES, FIPS 140-2, HTTPS, SSL/TLS, TLS
Cables included	AC, LAN (RJ-45)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Operating system version	5.0.0
Operating system installed	QNAP QTS
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Processor cores	4
Processor family	Annapurna Labs
Processor frequency	1.7 GHz
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	219 mm
Width	73 mm
Height	161 mm
Weight	1160 g
Package weight	1990 g