QNAP TS-131K User Manual

4. Basic Operations
This chapter describes basic NAS operations.
Power Button
Operation User Action Result
Power on Press the button once. The NAS powers on.
Power off Press and hold the button for 1.5
seconds.
The NAS powers off.
Force power off Press and hold the button for 5
seconds.
The NAS shuts down.
Important
Use this method only
when the NAS is
unresponsive.
Reset Button
Operation User Action Result
Basic system reset Press and hold the
button for 3 seconds.
The following settings are reset to default:
• System administrator password: MAC address of
adapter 1 without special characters. For example, if
the MAC address of adapter 1 is 11:22:33:44:55:66,
then the admin password will be 112233445566.
Tip
You can find the MAC address of adapter 1
using Qfinder Pro. A label attached to the
device also lists the address as MAC1.
• TCP/IP configuration:
• Obtain IP address settings automatically via
DHCP
• Disable jumbo frames
• If port trunking is enabled (multi-LAN models
only), the port trunking mode is reset to “Active
Backup (Failover)”.
• System port: 8080 (system service port)
• Security level: Low (Allow all connections)
• LCD panel password: (blank)
• VLAN: Disabled
Advanced system
reset
Press and hold the
button for 15 seconds.
The default factory settings are restored.
• To retrieve old data after an advanced system reset,
recreate the previous folder structure on the NAS.
TS-x31K User Guide
Basic Operations 27

QNAP TS-131K Specifications

General

RAID support	No
Storage drive size	- \
Hot-swap drive bays	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, NTFS, exFAT, ext3, ext4
Storage drive interface	-
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	1
Supported storage drive interfaces	Serial ATA II, Serial ATA III
Flash memory	512 MB
Internal memory	1 GB
Internal memory type	DDR4
Fan voltage	12 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply location	External
Power consumption (sleep)	7.29 W
Power consumption (typical)	11.62 W
Power supply unit (PSU) capacity	36 W
Chassis type	Tower
Cooling type	Active
Fan diameter	50 mm
Product color	Turquoise, White
LED indicators	HDD, LAN, Status, System
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Type	NAS
Noise level	15.8 dB
Device class	Home & Home Office
Share folder	CIFS/SMB
Backup features	Cloud, USB drive, iSCSI LUN
Browser supported	Mozilla Firefox, Microsoft Edge, Google Chrome, Apple Safari
Security algorithms	256-bit AES, FIPS 140-2, HTTPS, SSL/TLS, TLS
Cables included	AC, LAN (RJ-45)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Operating system version	5.0.0
Operating system installed	QNAP QTS
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Processor cores	4
Processor family	Annapurna Labs
Processor frequency	1.7 GHz
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	219 mm
Width	73 mm
Height	161 mm
Weight	1160 g
Package weight	1990 g