What to do if my Qoltec 50243 prints only part of the label?
If your Qoltec Label Maker is printing incomplete labels, it could be due to the following reasons: * The paper may not be positioned correctly. Adjust the paper so that it is placed in the middle. * The label size setting may be incorrect. Ensure you set the appropriate label size for your labels.
Why is my Qoltec 50243 Label Maker not printing?
There are several reasons why your Qoltec Label Maker might not be printing: * The communication cable may not be properly connected. Ensure the cable is securely connected to both the printer and the computer. * There may be a communication interface error. If using RS232, verify that the communication settings on your computer match the printer settings. You can confirm the RS232 baud rate by printing a test page. If using a LAN port, ensure the green/orange RJ-45 Ethernet light is on. You can check the printer's IP address by printing a test page. Also, check that the driver port settings are the same as the printer's. * The printer status might be in error. Make sure the printer is in standby mode (the green light is solid). Refer to the status LED status table for more informat...
Diagrams showing the front of the printer with key components labeled.
Diagrams showing the rear of the printer with interface ports labeled.
Diagrams illustrating the internal components of the printer.
Steps to connect the printer's power supply to the outlet.
Instructions for connecting the printer to a computer using a communication cable.
Procedure for opening the cover and placing the label roll inside the printer.
Details the functions triggered by pressing the FEED button in different states.
Describes the meaning of different LED status lights on the printer.
Procedure to print a self-test page to check printer status and quality.
Instructions for maintaining the printer, including cleaning procedures.
Detailed steps for cleaning the printer head using a cleaning pen or swab.
Instructions for cleaning sensors, rubber rollers, and the paper path.
General| Model | 50243 |
|---|---|
| Maximum resolution | 180 dpi |
| Print speed | 10 mm/s |
| Maximum print width | 12 mm |
| Product colour | Black |
| Keyboard | QWERTY |
| Memory | No |
| Printing Technology | Thermal |
| Power Source | 6 x AAA battery |
To Next Page