QQZM PnP User Manual (English)

Need help?

Do you have a question about the QQZM PnP and is the answer not in the manual?

QQZM PnP Specifications

General

Brand	QQZM
Model	PnP
Category	IP Camera
Language	English

Summary

Hardware Installation

P/T Wireless IP Camera Interface Introduction

Overview of the interface and ports for P/T Wireless IP Cameras.

Bullet/Dome IP Camera Interface Introduction

Overview of the interface and ports for Bullet and Dome IP Cameras.

Software Installation and Setup

Software Installation Steps

Guides through inserting the CD, running the installer, and desktop icon appearance.

Camera Access and Device Addition

Login IP Camera Client

Instructions for logging into the IP camera client software with default credentials.

Adding IP Camera Device via LAN

Steps to add an IP camera device using the auto setting guide in LAN.

Adding IP Camera Device via WAN

Instructions for adding IP cameras to the system using a context menu in WAN.

Wi-Fi Configuration

Wi-Fi Setting via Client Software

Guides selecting SSID, entering password, and connecting to Wi-Fi via client software.

Smart Phone Wi-Fi Setup (AP Function)

Guides setting up Wi-Fi connection using a smart phone via AP function.

Camera Settings and Features

PT (Pan/Tilt) Control Panel Operations

Explains the controls for Pan/Tilt movement, speed, and cruise settings.

Color Control Panel Adjustments

Details how to adjust brightness, saturation, contrast, and mirror settings.

IR-Cut Filter Control

Instructions on how to control the IR Cut Filter mode (Open, Close, Auto).

Recording, Snapshot, and Audio Functions

Record, Snapshot, and Two-way Audio Operations

Describes how to perform record, snapshot, and two-way audio functions.

SD Card Recording Setup

Guides on configuring the camera for recording onto an SD card.

Schedule Record Configuration

Details how to set a schedule for automatic video recording.

Setting Picture and Video File Paths

Explains how to configure save paths for snapshots and video files.

Video Playback Features

Playback Video Recorded Locally

Instructions for playing back videos recorded onto the computer.

Remote Playback Video from SD Card

Guides on downloading and playing back videos stored on the camera's SD card remotely.

Alarm Settings and Event Notifications

Alarm Introduction and Linkage Options

Explains alarm sources, linkage methods (sound, email, record, snapshot).

Alarm I/O Input/Output Configuration

Details configuration of I/O input/output voltage levels for alarm triggering.

Motion Detection Configuration

Guides setting up motion detection zones, sensitivity, and intervals for accurate alerts.

Alarm Record Configuration

Instructions for configuring the camera to record video when an alarm is triggered.

Alarm Email Notification Setup

Guides setting up email notifications with snapshots and events when alarms occur.

Alarm Snapshot Configuration

Details how to configure the camera to take snapshots when an alarm is triggered.

OSD and Time Synchronization

OSD (On-Screen Display) Setup

Instructions for enabling and customizing the On-Screen Display for camera information.

Time Setting and Synchronization

Guides on setting the camera's time using NTP, manual, or PC time synchronization.

Camera and Client Security Management

Changing Camera Password

Steps to change the camera's login password for enhanced security.

Factory Reset Procedure

Instructions for resetting the camera to its original factory default settings.

Client Software Password Change

Guides on changing the password for the client software after initial login.

Smart Phone Setup and Wi-Fi Connection

Download and Install Qvision App

Instructions for downloading the "Qvision" app for iOS and Android systems.

Wi-Fi Setup via Smart Phone AP Function