Technical Data
Control Unit
Power supply
110/230V~ only mains adaptor according to
EXPANSION CARD
Frequency 60/50Hz; use “list of authorized accessories”
(or according to instructions on mains
adaptor)
Operation Continuous operation
Operation temperature +10
0
C to +40
0
C
Storage temperature 0
0
C to 70
0
C
Outlet voltage on applicator socket Max. 3V pulsating direct current
Applicator connection Cinch jack
Safety grade II
Safety precaution BF (for electrical shock)
Intensity levels keys 1 to 10 + sensitive
Intensity indicators 1 * 16 dot-matrix LCD
Application duration 8 minutes (automatic switch-off)
1 to 30 minutes adjustable
Application current reverse <> Every 2 minutes
Application end Automatically after 8 minutes or manually
with stop key
Application current Approx. 650mA at level 10 approx. 30ìT
Approx. 300mA at level 1 approx. 3ìT
moving linear
Applicator 1
Loops
Cover
Mat Applicator M1
Enclosed in cotton-cretonne
Vinyl or cotton-cretonne
Applicator 2
Loops
Cover
Pillow Applicator K1
Enclosed in cotton-cretonne
Vinyl
Magnetic field strength
Case
Max. 30 micro-Tesla for the mat, approx. 40
micro-Tesla for pillow
PS-Polystyrol
Manufacturer Magnovit International Produktions- und
Handels AG, Industriestrasse 651, FL-9492
Eschen
Manufacturer’s Liability
The appliances are under warranty, according to current laws, if maintenance, care
and repairs are carried out as described on page 13. Otherwise this warranty is void.
All accessories have to be authorized by the manufacturer, especially the mains
adaptor. Otherwise this warranty is void.
The manufacturer reserves the right to modify the product at any time. Your QRS
consultant will inform you about QRS optionals as well as current prices.
To Next Page
Loading...
General