Start without using the smart card
Start the standard program: [1..10] for signal strength 1..10 or
It appears on display:
Basis 1..10 < 07:59
1/2
(Quick start) [Sens] press for sensitive setting
To repeat last program press [Memo]
Finish program press [Stop] during program
Switch off appliance display shows “Please select” press[Off]
Pre-settings
Select therapy program press [ON/Program] several times,
until desired program is displayed
Preselect therapy duration hold down time/duration key or press
several times, until the desired duration
is displayed (1..30min) (Standard 8min)
Select applicator press key, the selected applicator is displayed
(valid for one treatment)
Tone on/off press key, the setting goes into memory
The Control Unit
The patented Salut control unit generates, in the Mat applicator or Pillow applicator, a
pulsating magnetic field of the body’s own frequency pattern with an exactly defined
waveform. The field strength corresponds to the biological windows of humans. To
achieve an optimal effect the field strength was designed to be variable, because the
electro sensibility is subject to variations depending on the health of users and the
acidity of the blood. The field strength or intensity of the magnetic field can be chosen
via the settings 1 to 10 or Sensitive.
The control unit automatically switches off after 8 minutes, unless it was individually
programmed from 1 to 30 minutes. Treatment with the QRS magnetic field triggers
positive effects on the human organism, which continue for up to 8 hours.
To vitalise and stabilise good health in healthy people we recommend 2 treatments per
day, about 8 hours apart.
Attention: The magnetic field effectively spreads up to 0.3 metres sideways and up to
1.2 metres up and down, which means that people in the immediate proximity during
treatment will receive a gentle stimulation. People not requiring treatment should
remain outside the above-mentioned range.
To Next Page
Loading...
General