The STOP key can be used to interrupt the program at any time.
The Home Card
4 Program4 Program
The Home Card provided is a smart card that can be programmed by a QRS
healthcare professional or by the user.
Patient Card by a Healthcare Professional
Programming
In treating sick people, only the card programmed by a healthcare professional is to be
used.
Memo Operation Without the Home Card
If the appliance is operated without the home card, the last program sequences
inclusive of all settings (therapy, duration, field strength, tone, and applicator…) can be
repeated by pressing the Memo key.
The program sequence is memorized automatically.
Operation With the Home Card
With the Home card it is easy to save program settings, which can be
written on the back of the card with a ballpoint or waterproof felt-tip pen
Push the Home card as far as it will go into the card slot at the front of the
appliance. The switched-on appliance automatically recognizes the card.
Foreign smart cards are also recognized, but cannot be programmed.
To memorize a program with all its settings on the Home card press the
[Memo] key for 2 seconds, while the display shows “Please select”. When
the display “memorize [1..4]” appears, select one of the four memory
To Next Page
Loading...
General