Need help?Do you have a question about the QSC AC-C4T and is the answer not in the manual?
General| Impedance | 8 Ohms |
|---|---|
| Directivity Factor (Q) | 6.5 |
| Recommended Amplifier Power | 60 W |
| Driver Size | 4 inch |
| Power Handling | 60 W (Continuous) |
| Frequency Response (-6 dB) | 70Hz - 20kHz |
| Frequency Range (-10 dB) | 60Hz - 20kHz |
| Sensitivity | 87 dB |
| Transformer Taps | 70V: 15W, 7.5W |
| LF Transducer | 4" mineral-filled polypropylene cone |
| HF Transducer | 0.75" aluminum dome tweeter |
| Enclosure Material | ABS |
Explains the meaning of various warning and informational symbols used in the manual.
Provides essential safety guidelines for installation and operation to prevent injury or damage.
Outlines the 3-year limited warranty for QSC products in the USA and other regions.
Guides users through marking and cutting the ceiling hole for loudspeaker installation.
Details the process of wiring the loudspeaker, including connector and clamp usage.
Addresses seismic safety by detailing safety line attachment and local code adherence.
Explains how to securely mount the loudspeaker into the prepared ceiling opening.
Lists technical specifications such as transducer, power, impedance, frequency range, and SPL.
To Next Page
