To Next PageTo Next Page
Need help?Do you have a question about the QSC K10 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| LED indicators | Power, Signal strength, Stand-by |
| Housing material | Steel |
| Recommended usage | DJ |
| Suitable for outdoor use | - |
| Woofer | Yes |
| Speaker type | 2-way |
| Woofer diameter | 254 mm |
| Number of drivers | 1 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 10 \ |
| Subwoofer driver diameter (imperial) | 1.75 \ |
| Impedance | 40 Ω |
| Sensitivity | 129 dB |
| Frequency range | 56 - 20000 Hz |
| RMS rated power | 1000 W |
| Peak Music Power Output (PMPO) | 2000 W |
| Connectivity technology | Wired |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 320 mm |
| Height | 519 mm |
| Weight | 14500 g |
List of items included with the K Series loudspeaker systems.
Detailed features and components of the K8 and K10 loudspeaker models.
Detailed features and components of the K12 loudspeaker and KSub subwoofer.
Guidance on proper setup and deployment scenarios for K Series speakers.
Information on using the load-rated M10 installation points for suspended setups.
Ensuring adequate clearance for heat dissipation in installed configurations.
Procedure for safely disconnecting the AC power cord from the unit.
How to turn the loudspeaker system on/off and its standby mode.
Recommended order for powering up and shutting down audio system components.
Description of Channel A and B inputs, level settings, and indicators for K8/K10/K12.
Details on connecting Line Level inputs to the KSub subwoofer, including balanced/unbalanced.
Explanation of the direct line level outputs for K8, K10, and K12 models.
Explanation of the direct line level outputs for the KSub subwoofer model.
Overview of QSC's exclusive DSP features enhancing system performance.
Description of the NORM, EXT SUB, and DEEP settings for low-frequency response.
Description of the FLAT and VOCAL BOOST settings for high-frequency response.
Explanation of the automatic standby feature for energy conservation.
Details on controlling and interpreting the front-mounted Power LED.
Understanding the function and meaning of the rear-mounted LIMIT LED.
Diagrams illustrating proper wiring for the remote gain attenuator.
Diagram showing how to connect audio sources to the K Series inputs.
Diagram showing how to connect K Series outputs to other devices.
Example of a basic mono system setup with K Series speakers.
Example of a stereo system setup using multiple K Series speakers.
Physical dimensions for K8 and K10 loudspeakers.
Physical dimensions for K12 loudspeaker and KSub subwoofer.
Technical specifications for K8 and K10 loudspeaker systems.
Technical specifications for K12 loudspeaker and KSub subwoofer.
