To Next PageTo Next Page
Need help?Do you have a question about the QSC K10.2 and is the answer not in the manual?
General| Amplifier class | D |
|---|---|
| Recommended amplifier power (max) | 1800 W |
| Recommended amplifier power (min) | 225 W |
| Amplifier/receiver input interface type | 3.5 mm jack, XLR |
| Package weight | 17600 g |
| Frequency range | 50 - 20000 Hz |
| RMS rated power | - W |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| AirPlay | No |
| AC (power) in | Yes |
| Connectivity technology | Wired |
| Display | 1.75\ |
| Transducer material | Titan |
| Certification | CE, WEEE, UL, China RoHS, RoHS II, FCC B |
| Product color | Black |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Recommended usage | Universal |
| Audio output channels | 1.0 channels |
| Multi-Room Streaming (MRS) support | - |
| Speaker type | 2-way |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Speaker interface type | XLR |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 320 mm |
| Height | 519 mm |
| Weight | 14500 g |
Crucial safety guidelines and warnings for operating the equipment safely.
Detailed description of the K8.2 model's components and design.
Detailed description of the K10.2 model's components and design.
Information on using M10 points for suspension and rigging installations.
Specifics on connector type, gain, and signal indicators for Input A.
Specifics on connector type, gain, and signal indicators for Input B.
Specifics on connector type, gain, and signal indicators for Input C.
Detailed technical data and performance metrics for the K8.2 model.
Detailed technical data and performance metrics for the K10.2 model.
Detailed technical data and performance metrics for the K12.2 model.
