EasyManuals Logo

QSC K10.2 Mounting Quick Start Guide

QSC K10.2
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
K.2 Series
Yoke Mounting Quick Start Guide
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be
bodily injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not
followed, it may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: These mounting brackets shall only be used with K.2 Series loudspeakers. Use with other
apparatus could result in instability and possible injury.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Only use attachments/accessories specified by the manufacturer.
6. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, or has been dropped.
7. Adhere to all applicable, local codes.
8. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical
equipmentinstallation.
9. Before placing or installing any loudspeaker product, inspect all hardware, cabinets, transducers, brackets and
associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could
significantly reduce the strength of the installation and should be immediately corrected. Use only hardware which is
rated for the loading conditions of the installation and any possible short-term unexpected overloading. Never exceed
the rating of the hardware or equipment.
TD-000524-00-A
*TD-000524-00*

Other manuals for QSC K10.2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QSC K10.2 and is the answer not in the manual?

QSC K10.2 Specifications

General IconGeneral
Amplifier classD
Recommended amplifier power (max)1800 W
Recommended amplifier power (min)225 W
Amplifier/receiver input interface type3.5 mm jack, XLR
Package weight17600 g
Frequency range50 - 20000 Hz
RMS rated power- W
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
AirPlayNo
AC (power) inYes
Connectivity technologyWired
Display1.75\
Transducer materialTitan
CertificationCE, WEEE, UL, China RoHS, RoHS II, FCC B
Product colorBlack
Housing materialAcrylonitrile butadiene styrene (ABS)
Recommended usageUniversal
Audio output channels1.0 channels
Multi-Room Streaming (MRS) support-
Speaker type2-way
Number of drivers2
Speaker placementFloor
Speaker interface typeXLR
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width320 mm
Height519 mm
Weight14500 g

Related product manuals