To Next PageTo Next Page
Need help?Do you have a question about the QSC K8 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| LED indicators | Power, Signal strength, Stand-by |
| Housing material | Steel |
| Recommended usage | DJ |
| Suitable for outdoor use | - |
| Woofer | Yes |
| Speaker type | 2-way |
| Number of drivers | 1 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 8 \ |
| Subwoofer driver diameter (imperial) | 1.75 \ |
| Impedance | 40 Ω |
| Sensitivity | 127 dB |
| Frequency range | 61 - 20000 Hz |
| RMS rated power | 1000 W |
| Peak Music Power Output (PMPO) | 2000 W |
| Connectivity technology | Wired |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 269 mm |
|---|---|
| Width | 280 mm |
| Height | 450 mm |
| Weight | 12200 g |
Details the terms and conditions of the limited warranty provided by QSC Audio Products.
Guidance on optimal placement and pole-mounting configurations for K Series speakers.
Explanation of MIC/LINE level inputs, gain controls, and signal LEDs for K8, K10, K12.
Details on line level inputs for the KSub, including balanced and RCA connections.
Describes direct XLR outputs and the post-gain mixed line output for K8, K10, K12.
Details the direct XLR outputs and mixed gain knob for the KSub subwoofer.
Overview of advanced DSP functions like Excursion Limiting, DEEP™, and Intrinsic Correction™.
Explanation of user-selectable low-frequency and high-frequency EQ settings.
