Need help?Do you have a question about the QSC KLA12 and is the answer not in the manual?
General| Max SPL | 131 dB peak |
|---|---|
| Enclosure Material | ABS |
| Type | Active Line Array |
| LF Driver | 12" cone transducer |
| HF Driver | 1.75" diaphragm compression driver |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Input Impedance | 20k ohms unbalanced |
| AC Power Input | 100 – 240 VAC, 50 - 60 Hz |
Covers fire prevention, electrical safety, water exposure, cleaning, ventilation, and installation guidelines.
Guidelines for professional consultation, rigging, load calculation, and inspecting suspension components.
Details array configurations, component weights, and the 10:1 design factor for suspension.
Safety warnings and important notes for attaching KLA loudspeakers for suspension.
Step-by-step guide for attaching KLA12 units together or to the KLA AF12 array frame.
Instructions for attaching a KLA12 loudspeaker to the top of a KLA181 subwoofer.
Instructions for attaching KLA181 subwoofers together, ensuring proper alignment.
Procedure for attaching a KLA181 subwoofer to the KLA AF12 array frame.
Details on KLA12/KLA181 combinations, component weights, and array size limits.
Instructions for using KLA12 and KLA181 integrated suspension points with eyebolts.
Explanation of powerCON connectors for daisy-chaining power to multiple loudspeakers.
Steps for connecting loop-thru power cables and the AC mains power cord.
Recommended sequence for powering up and down the system to prevent audio artifacts.
Detailed technical specifications for KLA12 and KLA181 models, including frequency response, power, and dimensions.
To Next Page
