QSC K10.2 - Audio Output Options; K.2 Series User Menu Navigation; Display Interface Introduction; Menu Navigation Example

EN
13 (DRAFT 2017/05/02)
TD-000523-00-01-C
Outputs
1. Channel B pass-through output
connector. The signal here is
the same as the input signal
on Channel B. Use this to
daisy-chain loudspeakers or
to provide the signal to other
audioequipment.
2. Channel A pass-through output
connector. The signal here is
the same as the input signal
on Channel A. Use this to
daisy-chain loudspeakers or
to provide the signal to other
audioequipment.
3. MIX OUT (Post Gain) output
XLR is a mix of Channels A, B,
and C. The line-level output signal
is Post Gain. Any adjustments made to the gain of any of the three channels affects this output signal. This output
does not contain any DSP processing.
CAUTION!: Do not connect the MIX OUT (Post Gain) of a K.2 Series loudspeaker to any INPUT of the same
unit. This output is designed to send the mixed signal to OTHER K.2 Series units or to other audioequipment.
K.2 Series Menu
The K.2 Series loudspeakers provide a multi-function digital display for control and selection of loudspeaker functions
including presets, scenes, cross-over, EQ, delay and frequency contour.
Display Introduction
1. Home Screen – Displays input types (Mic,
Line, Hi-Z) for channels A and B, and main
functionalityheadings. Light background with black
text indicates the item is selected.
2. Exit, or go back button – press to return to the
previous screen or menu level.
3. Enter button – confirm a selected parameter or open
the selected menuitem.
4. Selector knob – move to another menu item, or
change a selected parameter.
5. Left side, Home screen displays the parameter name.
6. Right side, Home screen displays the current state of
the parameter.
Navigation Example:
To select a Preset:
1. Turn the Selector knob (4) clockwise to highlight the PRESET line.
2. Press the Enter button (3) to access the PRESET submenu.
3. Turn the Selector knob (4) clockwise or counterclockwise as needed to highlight the PRESET you wish to recall.
4. Press the Enter button (3) to recall the PRESET. A small triangle displays next to the recalled (active) PRESET.
5. Press the Exit button (2) to return to the Home screen.
— Figure 17 —
1
2
3
— Figure 18 —
EQ: IN
A: LINE
PRESET: DEFAULT
NO SUB
DELAY: 0 ms
SETTINGS
B: Hi-Z
:
1
2 3 4
5 6