Need help?Do you have a question about the QSC AcousticDesign AD-C6T and is the answer not in the manual?
General| Woofer Size | 6.5 inches |
|---|---|
| Frequency Response | 70 Hz - 20 kHz |
| Sensitivity | 89 dB |
| Impedance | 8 ohms |
| Transformer Taps | 70V: 60 W, 30 W, 15 W, 7.5 W; 100V: 60 W, 30 W, 15 W |
| Grille Material | Powder-coated steel |
| Type | Ceiling Loudspeaker |
| Enclosure Material | ABS baffle with steel backcan |
| LF Transducer | 6.5-inch woofer |
| HF Transducer | 1-inch tweeter |
| Coverage Angle | 110° conical |
| Finish | White (paintable) |
| Weight | 5.5 lbs |
Defines symbols used in the manual, including warning, caution, and important notations.
Provides critical safety guidelines for installation and operation to prevent injury or damage.
Outlines requirements for qualified service personnel and QSC authorization for repairs.
Directs users to the QSC website for warranty details and copies.
Steps for marking, cutting, and preparing the ceiling for loudspeaker installation.
Instructions for setting transformer taps and connecting speaker wires.
Procedure for installing the loudspeaker into the ceiling using dog-ear screws.
Detailed technical specifications for the AcousticDesign AD-C6T loudspeaker.
Provides physical dimensions and diagrams for the AD-C6T loudspeaker.
To Next Page
