QSC AcousticDesign AD-C6T - Product Specifications and Dimensions; Specifications; Dimensions

[9.32 in]
237 mm
[9.12 in]
232 mm
[9.45 in]
240 mm
[11.02 in]
280 mm
Specifications
AD-C6T
LF Transducer 165 mm [6.5 in] weather resistant paper cone woofer
HF Transducer 25 mm [1 in] aluminum dome tweeter
Rated noise power [Wrms]
1
60
Nominal Impedance [ohms] 16
Transformer Taps 70V: 60, 30, 15, 7.5 W
100V: 60, 30, 15 W
Effective frequency range
2
63 Hz – 20 kHz
Rated coverage (‑6 dB) [°}
3
140° conical DMT
Directivity factor 6.5
Directivity index [dB] 8
Sensitivity [dB]
4
88
Maximum continuous SPL [dB]
5
106
Maximum peak SPL [dB]
5
112
Enclosure material ABS bafe on powder coated steel back can
Grille material Powder coated steel
Cutout dimension Ø 245 mm [Ø 9.65 in]
Net weight 4.3 kg [9.5 lb]
Product dimensions (Diameter x Height) Ø 280 x 237 mm [Ø 11.02 x 9.33 in.]
Shipping weight 12.6 kg [27.8 lb] (pair packed)
Shipping dimensions (H x W x D) 330 x 737 x 381 mm [13 x 29 x 15 in] (pair packed)
Mailing Address:
QSC, LLC
1675 MacArthur Boulevard
Costa Mesa, CA 92626-1468 USA
E-mail:
info@qsc.com
service@qsc.com
tech_support@qsc.com
Telephone Numbers:
Main Number: +1.714.754.6175
Sales & Marketing: +1.714.957.7100 or toll free (USA only) +1.800.854.4079
Customer Service: +1.714.957.7150 or toll free (USA only) +1.800.772.2834
Fax Numbers:
Sales & Marketing FAX: +1.714.754.6174
Customer Service FAX: +1.714.754.6173
qsc.com
1
IEC noise, 2hrs
2
‑10dB from rated sensitivity
3
500 Hz–5 kHz average
4
Transfomer bypassed, 1W, 1m, IEC bafe, 200‑10kHz
average, on‑axis
5
Calculated from rated noise voltage and sensitivity
Dimensions
AD-C6T