12
EN
TD-000329-00-C
Specifi cations
AD-S6T AD-S8T AD-S10T
Confi guration 6" 2-way with transformer 8” 2-way with transformer 10” 2-way with transformer
Effective Frequency Range (-10 dB)
1
60 – 20 kHz 55 – 20 kHz 50 – 19 kHz
Rated Voltage / Power
2
35 Vrms / 150 W 40 Vrms / 200 W 45 Vrms / 250 W
Broad-band Sensitivity
3
89 dB SPL 90 dB SPL 92 dB SPL
Coverage Angle (-6 dB)
4
105° 105° 90°
Directivity Factor (Q) 5 7 10
Directivity Index 7 dB 9 dB 10 dB
Maximum SPL Continuous (1 m)
5
110 dB 113 dB 116 dB
Maximum SPL Peak (1 m)
5
116 dB 119 dB 122 dB
Nominal Impedance 8 8 8
Recommended Amplifi er Power 300 W 400 W 500 W
Transformer Tap 70 V 60, 30, 15, 7.5 W and 8 bypass 60, 30, 15, 7.5 W and 8 bypass 100, 50, 25, 12.5 W and 8 Bypass
Transformer Tap 100 V 60, 30, 15 W and 8 bypass 60, 30, 15 W and 8 bypass 100, 50, 25 W and 8 Bypass
High-frequency Transducer 1” silk dome tweeter / 1” voice-coil horn loaded 1” Exit / 1.4” Voice-coil Compression Driver 1” Exit / 1.4” Voice-coil Compression Driver
Low-frequency Transducer 6” weather resistant paper cone woofer, 38 mm
/ 1.5” voice-coil
8” Weather Resistant Paper Cone Woofer, 50
mm / 2” Voice-coil
10” Weather Resistant Paper Cone Woofer, 64
mm / 2.5” Voice-coil
Input Connector Euro-style Connector with Parallel Output
Enclosure Details
Material ABS Polymer
Finish Black RAL 9011 or White RAL 9010 Paint
Grille Powder-coated Aluminum
X-Mount Material Powder-coated Aluminum
Ingress Protection Meets IP-54 for dust and splash resistance.
Operating Environment Designed for indoor and outdoor use
Operating Temperature Range -20 to 50 °C / -4 to 122 °F
Testing: Qualifi ed for outdoor
use using the following tests:
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
High and low temperature: tested to QSC internal standards between -20° and 50° C
Weight (Net) 6.2 kg / 13.6 lbs 11 kg / 24 lbs 14 kg / 31 lbs
Dimensions (HWD) 365 mm x 215 mm x 215 mm
14.4" x 8.5" x 8.5"
440 mm x 254 mm x 251 mm
17.3" x 10.0" x 9.8"
516 mm x 318 mm x 298 mm
20.3" x 12.5" x 11.7"
Included Accessories X-Mount™ system, Euro-style connector, input
panel cover
X-Mount™ system, Euro-style connector X-Mount™ system, Euro-style connector
Optional Accessories N/A Yoke Mount Bracket Kit –
YMS8T-WHT / YMS8T-BLK
M10 Kit-C
Yoke Mount Bracket Kit –
YMS10T-WHT / YMS10T-BLK
M10 Kit-C
1 Free-fi eld, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-fi eld sensitivity, 2.83V, 1 m
4 Coverage angle measured with 3 - 10 kHz bandwidth
5 Calculated from rated noise voltage and sensitivity
To Next Page
Loading...
