EasyManua.ls Logo

QSC AcousticDesign AD-S6T - Page 13

QSC AcousticDesign AD-S6T
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
EN
TD-000329-00-C
Specifi cations
AD-S12 AD-S112sw
Confi guration 12” 2-way 12” direct-radiating subwoofer
Effective Frequency Range (-10 dB)
1
52 – 20 kHz 30 – 135 Hz
Rated Voltage / Power
2
50 Vrms / 300 W 50 Vrms / 300 W
Broad-band Sensitivity
3
95 dB SPL 90 dB SPL
Coverage Angle (-6 dB)
4
75° M10 Kit-C
Directivity Factor (Q) 12 N/A
Directivity Index 11 dB N/A
Maximum SPL Continuous (1 m)
5
120 dB 115 dB
Maximum SPL Peak (1 m)
5
126 dB 121 dB
Nominal Impedance 8 8
Recommended Amplifi er Power 600 W 600 W
Transformer Tap 70 V N/A N/A
Transformer Tap 100 V N/A N/A
High-Frequency Transducer 1” Exit / 1.4” Voice-coil Compression Driver N/A
Low-frequency Transducer 12” Weather Resistant Paper Cone Woofer, 64
mm / 2.5" Voice-coil
12” weather resistant paper cone woofer,
64 mm / 2.5” voice-coil
Input Connector Euro-style Connector with Parallel Output
Enclosure Details
Material ABS Polymer
Finish Black RAL 9011 or White RAL 9010 Paint Black RAL 9011 Paint
Grille Powder-coated Aluminum
Yoke Material Powder coated galvanized steel
Ingress Protection Meets IP-54 for dust and splash resistance.
Operating Environment Designed for indoor and outdoor use
Operating Temperature Range -20 to 50 °C / -4 to 122 °F
Testing: Qualifi ed for outdoor
use using the following tests:
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
High and low temperature: tested to QSC internal standards between -20° and 50° C
Weight (Net) 16 kg / 35.0 lbs 13.2 kg / 29 lbs
Dimensions (HWD) 596 mm x 354 mm x 323 mm
23.5" x 13.9" x 12.7"
596 mm x 354 mm x 322 mm
23.5" x 13.9" x 12.7"
Included Accessories X-Mount™ system, Euro-style connector 596 mm x 354 mm x 323 mm
23.4" x 13.9" x 12.7"
Optional Accessories Yoke Mount Bracket Kit –
YMS12-WHT / YMS12-BLK
M10 Kit-C
M10 Kit-C
1 Free-fi eld, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-fi eld sensitivity, 2.83V, 1 m
4 Coverage angle measured with 3 - 10 kHz bandwidth
5 Calculated from rated noise voltage and sensitivity

Related product manuals