Need help?Do you have a question about the QSC MX 2000 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 10 kOhm Unbalanced, 20 kOhm Balanced |
| Dimensions | 483mm x 89mm x 445mm |
| Total Harmonic Distortion | Less than 0.02% |
Lists primary attributes: 1000W/channel, rack spaces, fan cooling, dual mono config, warranty.
Details continuous average output power for various ohm loads and bridged mono configurations.
Specifies THD, SMPTE-IMD, frequency response range, damping factor, slew rate, dynamic headroom, and noise levels.
Describes front panel controls, status indicators, and input/output connection types.
Details the fan cooling airflow, amplifier protection circuits, and load protection features.
Outlines power supply requirements, consumption, physical dimensions, and weight.
Specifies solid-state circuitry, dual independent channels, and AC mains compatibility.
Defines output power, frequency response, voltage gain, input sensitivity, and impedance requirements.
Lists front panel controls, indicators, input/output connectors, cooling, and chassis specifications.
To Next Page
