Need help?Do you have a question about the QSC RMX Series and is the answer not in the manual?
General| Series | RMX |
|---|---|
| Channels | 2 |
| Frequency Response | 20Hz - 20kHz (+0/-1dB) |
| Signal to Noise Ratio | 100 dB |
| Input Impedance | 20k ohms (balanced), 10k ohms (unbalanced) |
| Cooling | Variable speed fan |
| Protection | Thermal, short circuit, DC, ultrasonic, RF |
| Connectors | Input: XLR and 1/4" TRS, Output: Binding posts and Speakon |
Overview of the RMX Series amplifiers, their features, and models.
Key features of the RMX Series amplifiers, such as filtering and input modes.
Description of the amplifier's front panel layout, controls, and indicators.
Explanation of the amplifier's rear panel connections and ports.
Explanation of the clip limiter's purpose, operation, and when to use it.
Details on low-frequency filter settings (30 Hz, 50 Hz, OFF) and their effects.
How to use the parallel input mode for signal distribution to multiple amps.
How to operate the amplifier in bridged mono mode for increased power.
Comparison and explanation of different amplifier operating modes.
Further details and precautions for bridged mono mode operation.
Instructions and considerations for mounting the amplifier in a rack.
Details on balanced and unbalanced input types (XLR, TRS, barrier strip).
Information on using Speakon connectors for speaker output.
Guidelines for proper speaker wire sizing and placement.
Guide to connecting speakers using binding post terminals.
Information on selecting the correct AC mains voltage for the amplifier.
How to use the power switch and adjust gain controls for operation.
Explanation of the POWER, CLIP, and SIGNAL LED indicators.
Importance of proper airflow and the amplifier's cooling system.
Guidance on operating the amplifier within safe limits to avoid muting.
Examples of using the amplifier for sound reinforcement systems.
How to configure the amplifier for biamp monitor applications.
Examples of using the amplifier for instrument amplification.
Steps to diagnose and resolve "no sound" problems based on LED indications.
Troubleshooting when the SIGNAL LED is not lit, but POWER is on.
Troubleshooting when the CLIP LED flashes during signal application.
Diagnosing protective muting when CLIP LEDs are steady.
Troubleshooting distorted audio, focusing on clipping and load issues.
How to fix issues with poor or no channel separation.
Identifying and resolving hum issues in the audio signal path.
Diagnosing and minimizing hiss from the source or amplifier.
Controlling squeals and feedback using mixer and signal path adjustments.
QSC's disclaimer regarding damage from improper use or installation.
Terms and duration of the RMX amplifier product warranty.
Official mailing address for QSC Audio Products, Inc.
Key telephone numbers for sales, marketing, and customer service.
Facsimile numbers and official website and email contacts.
To Next Page
