Need help?Do you have a question about the QSC RMX 5050 and is the answer not in the manual?
General| Power Output (8 ohms bridged mono) | 3600 W |
|---|---|
| Power Output (4 ohms bridged mono) | 5000 W |
| Frequency Response | 20 Hz - 20 kHz, +0/-1 dB |
| Power Output (4 ohms stereo) | 1800 W per channel |
| Power Output (2 ohms stereo) | 2500W |
| Signal to Noise Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.05% |
| Dimensions | 483 x 89 x 419 mm |
| Gain | 32dB |
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Connectors | XLR and 1/4" inputs, binding post and Speakon outputs |
| Cooling | Variable speed fan |
| Protection | thermal |
| Power Requirements | 120V, 240V, or 100V, 50/60Hz |
| Controls | Front: Gain controls, rear panel switches for stereo/mono mode, input sensitivity, and clip limiting |
Explains symbols for dangerous voltage, hazard, and important instructions.
Lists the main features and capabilities of the amplifier.
Illustrates front panel controls and rear panel connectors with numbered labels.
Details the items included in the factory carton and shipping advice.
Instructions for rack mounting, using feet, and ensuring proper cooling airflow.
How to connect AC power and warnings about line voltage.
Overview of mode switches for operation and settings for clip limiters.
Explains how to set mode switches for different operational configurations.
Instructions for using and setting the low frequency filters for each channel.
Describes how to connect balanced and unbalanced signals using barrier strip terminals.
Details on connecting balanced and unbalanced signals via XLR and TRS connectors.
Wiring instructions for binding post and Speakon outputs in various modes.
Crucial safety warnings regarding touching output terminals while the amplifier is on.
Explains the meaning of POWER, CLIP, SIGNAL, and PROTECT LEDs.
Details normal and abnormal indications for CLIP and SIGNAL LEDs.
Explains the PROTECT LED for protective muting and troubleshooting.
How to use the gain controls and their effect on output power.
Details QSC's 3-year warranty, disclaimer, and contact methods.
Detailed specifications for output power, input sensitivity, and impedance.
Covers damping factor, noise, protection features, and cooling.
Electrical requirements, circuit breaker ratings, weight, and physical dimensions.
Provides mailing address, telephone numbers, fax, website, and email for QSC.
To Next Page
