QSC CX204V User Manual

CX Series
User Guide
2-Channel Low-impedance Models:
CX302
CX502
CX702
CX902
CX1102
4-Channel Low-impedance Models:
CX254
CX404
70 Volt Direct Output Models:
CX204V (4-channel)
CX302V (2-channel)
CX602V (2-channel, 8 ohm)
CX1202V (2-channel, 4 and 8 ohm)
TD-000077-00-K
*TD-000077-00*

QSC CX204V Specifications

General

Type	Power Amplifier
Channels	2
Power Output (8 Ohms)	200W per channel
Voltage Gain	32 dB
Frequency Response	20 Hz - 20 kHz
Signal-to-Noise Ratio	> 100 dB
Input Sensitivity	1.4 V
Dimensions (H x W x D)	3.5" x 19" x 15.5" (88mm x 483mm x 394mm)
Input Impedance	20 kOhms
Connectors (Input)	XLR, 1/4 in TRS
Connectors (Output)	Binding Posts, Speakon
Damping Factor	> 200
Cooling	Variable-speed fan

Summary

Explanation of Symbols

Important Safety Instructions

Key safety instructions for QSC CX Series amplifiers, covering fire, shock, and environmental hazards.

Front Panel

Rear Panel

Description of the rear panel connectors and controls for QSC CX Series amplifiers.

Rack Mounting

AC Mains Connection

Instructions for safely connecting QSC CX Series amplifiers to AC power, including voltage precautions.

Setting the Mode Switches

Setting Clip Limiters

Selecting Stereo, Parallel, or Bridge Mode

Detailed instructions for setting Stereo, Parallel, and Bridge modes on QSC CX Series amplifiers.

Setting Low Frequency Filters

DataPort and Inputs

Terminal Block Connectors

XLR Inputs

Outputs

Low Impedance Outputs

Distributed Outputs (“V” models, 70V/140V)

LED Indicators

Gain Controls

Specifications: 4-Channel Low-Impedance Models

Specifications: 2-Channel Low-Impedance Models

Specifications: 70V Distributed Models