Do you have a question about the QSC CX Series and is the answer not in the manual?
Power Output (8 ohms) | Varies by model |
---|---|
Power Output (4 ohms) | Varies by model |
Power Output | Varies by model (CX168, CX254, CX302, CX404, CX602, CX902, CX1102, CX1202, CX1602) |
Signal to Noise Ratio | >100 dB |
Damping Factor | >200 |
Cooling | Variable-speed fan |
Dimensions | Varies by model |
Weight | Varies by model |
Channels | 2 |
Load Impedance | 4Ω, 8Ω |
Protection | Thermal, short circuit, DC offset, ultrasonic |
Explains graphical symbols, general safety, and specific warnings for amplifier use.
Describes the CX Series amplifiers and identifies front/rear panel components.
Guides users through setup, controls, common issues, and advanced features.
Presents key performance data, power output, consumption, and protection circuits.
Explains the concept of distributed audio lines and their voltage ratings.
Outlines steps for system design, placement, and coverage.
Details power calculation, amplifier choice, and component derating.
Covers speaker capacity, transformer saturation, wire loss, and mixed loads.
Provides QSC's address, telephone numbers, and web resources for support.