To Next PageTo Next Page
Need help?Do you have a question about the QSC CX-Q 4K4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 1.4 V |
| Input Channels | 4 |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 20 kΩ |
| Cooling | Variable-speed fan |
| Protection | Thermal, short circuit, Overload |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Networking | Gigabit Ethernet |
Essential guidelines for safe installation and operation to prevent shock and fire hazards.
Emphasizes using authorized service stations for repairs to avoid damage and injury.
Provides instructions and cautions for securely mounting the amplifier in a rack.
Discusses independent output configurations, channel combining (BTL, Parallel), and FAST technology.
Illustrates wiring for separate, bridged, and parallel loudspeaker configurations.
Provides a step-by-step guide for connecting loudspeakers, including safety warnings.
Explains the functions of front panel buttons, knobs, and LEDs for amplifier operation.
Describes the different operating modes: Off, Run, Standby, and Mute All.
Lists detailed power specifications for 8-channel models under different configurations and loads.
Shows peak voltage and current capabilities for 8-channel models under different configurations.
Summarizes key operating specs like distortion, frequency response, noise, gain, and input impedance.
