QSC CX1202V - User Manual

CX Series
User Guide
2-Channel Low-impedance Models:
CX302
CX502
CX702
CX902
CX1102
4-Channel Low-impedance Models:
CX254
CX404
70 Volt Direct Output Models:
CX204V (4-channel)
CX302V (2-channel)
CX602V (2-channel, 8 ohm)
CX1202V (2-channel, 4 and 8 ohm)
TD-000077-00-K
*TD-000077-00*

Summary

EXPLANATION OF SYMBOLS

IMPORTANT SAFETY INSTRUCTIONS

Detailed safety guidelines and precautions for operating and maintaining the amplifier.

Maintenance and Repair

Front Panel Overview

Rear Panel Overview

Cooling System

AC Mains Connection

Setting the Mode Switches

Setting Clip Limiters

Selecting Stereo, Parallel, or Bridge Mode

Setting Low Frequency Filters

DataPort Connectivity

Input Connections

Output Connections

LED Indicators Explained

Gain Controls and Security

2-Channel Low-Impedance Model Specifications

70 V Line Model Specifications

QSC CX1202V Specifications

General

Channels	2
8 Ohm Stereo Power	1200W
8 Ohm Bridged Power	2400W
70V Stereo Power	1200W
100V Stereo Power	1200W
Signal-to-Noise Ratio	> 100 dB
Damping Factor	> 200
Input Sensitivity	1.4V
Frequency Response	20 Hz to 20 kHz
Input Impedance	10 kΩ unbalanced, 20 kΩ balanced
Dimensions (H x W x D)	3.5" x 19" x 15.5" (89mm x 483mm x 394mm)
Power Requirements	100-240 VAC, 50-60 Hz
Weight	34 lb (15.4 kg)