11
TD-001541-01-B
Q-SYS Core 110 Series Specifications
Specification Value
Input Frequency Response
20 Hz to 20 kHz @ +21 dBu +0.05 dB/-0.5 dB
Input THD+N @ 1 kHz
@ +21 dBu Sensitivity and @ +21 dBu input < 0.1%
@ +21 dBu Sensitivity and @ +10 dBu input < 0.0015%
@ +10 dBu Sensitivity and @ +8 dBu input < 0.001%
@ -10 dBu Sensitivity and @ -10.5 dBu input < 0.001%
@ -39 dBu Sensitivity and @ -39.5 dBu input < 0.007%
Input to Input Crosstalk @1 kHz
@ +21 dBu sensitivity
@ +10 dBu sensitivity
@ -10 dBu sensitivity
@ -39 dBu sensitivity
110 dB Typical, 90 dB Max
105 dB Typical, 90 dB Max
100 dB Typical, 90 dB Max
75 dB Typical
Input Dynamic Range
@ +21 dBu Sensitivity > 109.5 dB
@ +10 dBu Sensitivity > 106.4 dB
@ -10 dBu Sensitivity > 104.6 dB
Input Common Mode Noise Rejection
@ +21 dBu Sensitivity < 51, 20 Hz – 3 kHz
< 43, 20 Hz – 10 kHz
< 36, 20 Hz – 20 kHz
@ +10 dBu Sensitivity < 57, 20 Hz – 3 kHz
< 47, 20 Hz – 10 kHz
< 41, 20 Hz – 20 kHz
@ -10 dBu Sensitivity < 67, 20 Hz – 3 kHz
< 58, 20 Hz – 10 kHz
< 53, 20 Hz - 20 kHz
@ -39 dBu Sensitivity < 60, 20 Hz – 3 kHz
< 54, 20 Hz – 10 kHz
< 50, 20 Hz – 20 kHz
Input Impedance (balanced)
7.2k Ω Nominal
Input Sensitivity Range (1 dB Steps) -39 dBu min to +21 dBu max
Output Frequency Response
20 Hz to 20 kHz @ all settings +0.2/-0.5 dB
Output THD 0.005% Typical, +21dBu Max Output Level
EIN (no weighting, 20 Hz to 20 kHz) < -121 dB
Output Crosstalk @ 1 kHz > 100 dB Typical, 90 dB max
Output Dynamic Range > 108 dB
Output Impedance (balanced)
332 Ω
Output Level Range (1 dB Steps) -39 dBu min to +21 dBu max
Q-LAN Channels 128
AEC Channels
Q-SYS Core 110f
Q-SYS Core 110c
16
4
Core-to-Core Streaming Channels 128
MTP Default = 16, With optional MD-110 SSD and MTP-32 = 32
USB B (Audio)
Bit Depth Selectable 16-bit, 24-bit
Number of Channels up to 16x16
Sample Rate 48 kHz
To Next Page
Loading...