QSC Q-SYS Core 110f - Package Contents and Installation; Package Contents; Installation Guide; Front Panel Features

5
TD-001541-01-B
Package Contents
1
Core 110
1
AC Power
cord
1
Phone cord
4
GPIO (black)
8
Mic/Line In (orange)
8
Flex Channels
(blue)
8
Mic/Line Out
(green)
1
External Power
(green)
1
RS232 Tx/Rx
(green)
1
Core 110
Installation
TD-001541
1
QSC Warranty
TD-000453
4
Rubber feet
Installation
The following steps are written in the recommended installation order.
Rack-Mounting
CAUTION!: Be sure that each side has a minimum of 2cmclearance. Make sure that there is a fresh-air supply on
the left side of theunit.
The Core 110 is designed to be mounted in a standard rack-mount unit. The Core is 1RU high, and 283mm (11.1 in) deep.
1. Secure the Core in the rack with four screws in front (screws not included).
Features
Front Panel
— Figure 1 —
1 2 3 54
DEVICE:
DESIGN:
STATUS:
DESIGN STATUS
<Core Name>
<Design Name>
<Status>
1. OLED Display – displays information about the core's settings
andstatus.
2. Next button – cycles through the information pages
3. ID button – locates the Core in Q-SYS Designer GUI and
Configurator
4. Power LED – illuminates blue when the Core is on
5. USB Type A Host connectors (2)