QSC Q-SYS CORE 510i - Product Features Overview; Front Panel Features; Rear Panel Connectivity Ports

6
TD-000521-00-A
Features
Front Panel
— Figure 1 —
1 2 3 54
DEVICE:
DESIGN:
STATUS:
DESIGN STATUS
<Device Name>
<Design Name>
<Status>
1. OLED Display – Displays information about the Core's
settings andstatus.
2. NEXT button – Cycles through the OLED information
pages
3. ID button – Locates the Core in Q-SYS Designer GUI
and Configurator
4. POWER LED – Illuminates blue when the Core is on
5. USB Ports – USB Type A Host connectors (2)
Rear Panel
— Figure 2 —
8
53 76421
1. Eight Audio I/O Card Bays – Accept Q-SYS Type 2 Audio I/O Cards (supports up to 128x128 local audio channels)
2. GPIO A and GPIO B – Female DA-15 connectors for Q-SYS control I/O
3. RS232 – Male DE-9 serial communications interface
4. HDMI – Video Output
5. AC Mains – IEC 60320 C14 receptacle
6. AUX LAN – RJ45: Data, VoIP, WAN streaming, management Auxiliary Ports – USB Type A Host Ports
7. LAN A – RJ45: Q-LAN, AES67, Audio, VoIP, management Auxiliary Ports – USB Type A Host Ports
8. LAN B – RJ45: Q-LAN, AES67, Audio, VoIP, management