TouchMix Self-Guided Tour 17
that engine (Image 6.3).
To setup an Eect Preset:
• Select a category from the “Source”
(Image 6.4) window.
• Select a “Type” from the middle window
(Image 6.5).
In the last window you can choose the Preset
that best ts your application.
• With the Preset selected, touch the green
“Recall” (Image 6.6) button and you’re done.
Image 6.4
Image 6.5
Image 6.6
6. WIZARDS (Cont’d)
To Next Page
Loading...
