TouchMix Self-Guided Tour 18
The Gain Wizard is designed to help you get the
best performance possible from your mixer by
helping you set the trim level for your
Input preamps.
To Access the Gain Wizard:
• Press the “Wizard” (Image 6.7) button on the
right-hand side of the mixer.
• Select the “Gain Wizard” (Image 6.8) button
on the screen.
The Wizard will show you all 16 Inputs with clip
indicators above them. The number indicated on
the red clip indicator is the number of increments
you should turn the Input Trim Knob counter-
clockwise (down) (Image 6.9).
Image 6.7
Image 6.8
Image 6.9
6. WIZARDS (Cont’d)
To Next Page
Loading...
